---
title: Copper RFID prototype on NanoPaper
description: Explore a copper RFID prototype on NanoPaper, including printing, thermal processing, component attachment and a successful reader response.
image: https://cdn.shopify.com/s/files/1/0729/9986/2324/files/nanopaper-v8-rfid-reader-20261023.jpg?v=1792785806
---

[![Tangho NanoPaper](https://cdn.shopify.com/s/files/1/0729/9986/2324/files/Tangho_NanoPaper_Thin_Green_with_TM.svg?v=1794497439)](https://nanopaper.io/)

[Applications](https://nanopaper.io/pages/applications)[Evaluation](https://nanopaper.io/pages/evaluation-and-pilots)[Technical resources](https://nanopaper.io/pages/technical-resources)[News & Talks](https://nanopaper.io/pages/news-talks)

[Samples](https://nanopaper.io/products/nanopaper)[Cart](https://nanopaper.io/cart)[Discuss your application](https://docs.nanopaper.io/application-inquiry/)

Menu

[Applications](https://nanopaper.io/pages/applications)[Evaluation](https://nanopaper.io/pages/evaluation-and-pilots)[Technical resources](https://nanopaper.io/pages/technical-resources)[News & Talks](https://nanopaper.io/pages/news-talks)[Samples](https://nanopaper.io/products/nanopaper)[Cart](https://nanopaper.io/cart)[Discuss your application](https://docs.nanopaper.io/application-inquiry/)

![The assembled NanoPaper RFID prototype beside the reader and its computer readout.](https://cdn.shopify.com/s/files/1/0729/9986/2324/files/nanopaper-v8-rfid-reader-20261023.jpg?v=1792785806)

# Copper RFID prototype on NanoPaper

![Dr. Andrew Finkle](https://docs.nanopaper.io/hs-fs/hubfs/Andrew-1.png?width=48&height=48&name=Andrew-1.png)

 Dr. Andrew Finkle

October 26, 2026

A printed copper antenna, low-temperature soldered chip attachment, and a successful reader response.

![The assembled NanoPaper RFID prototype beside the reader and its computer readout.](https://cdn.shopify.com/s/files/1/0729/9986/2324/files/nanopaper-v8-rfid-reader-20261023.jpg?v=1792785806)

The assembled NanoPaper RFID prototype beside the reader and its computer readout.

## What we built

A UHF antenna was printed on Tangho NanoPaper™ with copper ink, then fitted with a surface-mount RFID component using low-temperature solder. An external reader detected the completed tag and displayed its identifier on a computer.

## Materials and equipment

- **Substrate:** NanoPaper sheet, used as received and supported flat for printing.
- **Conductive ink:** Copprint LF-360 copper ink, used without dilution or formulation changes.
- **Printer:** Voltera NOVA, using direct ink writing.
- **RFID component:** Murata LXMS21ACMD-220.
- **Thermal equipment:** an oven and a TLC 5500T thermal laminator with its original motor.

## Print and process the antenna

The antenna geometry included continuous conductive paths and defined pads for the RFID component. It was deposited in a single printing pass.

![Direct ink writing of the antenna with Copprint LF-360 copper ink on a Voltera NOVA.](https://cdn.shopify.com/s/files/1/0729/9986/2324/files/nanopaper-v8-rfid-printing-20261023.jpg?v=1792785811)

Direct ink writing of the antenna with Copprint LF-360 copper ink on a Voltera NOVA.

1. **Dry the print.** The assembly report records oven drying at 80 °C for approximately 2 minutes, or until the solvent had visibly evaporated.
2. **Process through the heated rollers.** Copper-ink processing was demonstrated using a TLC 5500T laminator at a 200 °C setting, with an estimated cumulative residence time of approximately 30 seconds across six passes.
3. **Apply the subsequent oven step.** The recorded sequence then used 140 °C for 2 minutes before component attachment.

The laminator estimate is cumulative time in the heated zone across six passes. The 200 °C value is the equipment setting, not a measured sheet temperature or a continuous hold. The oven steps above describe this experiment.

## Attach the component and read the tag

After processing, continuity of the printed antenna was checked. Low-temperature solder paste was applied to the copper pads, the Murata component was positioned, and localized heating formed the connections. The completed assembly was then presented to the reader.

[Open the demonstration video](https://cdn.shopify.com/videos/c/vp/eadd8ff202914a88bf2edf38a94c9ca4/eadd8ff202914a88bf2edf38a94c9ca4.SD-480p-1.0Mbps-98931765.mp4)

The completed NanoPaper RFID tag being scanned.

The observed result is a successful reader response from the assembled prototype. The completed experiment record does not specify the solder alloy or measured joint temperature, so these are not presented as a repeatable soldering profile.

## A supporting substrate comparison

A related study used the same copper ink, antenna pattern and processing sequence on NanoPaper, polyimide and PET. The tested PET film showed visible deformation; the NanoPaper sample retained its printed antenna pattern.

![Antenna patterns before and after the complete processing sequence in the comparison study. The tested PET film showed visible deformation.](https://cdn.shopify.com/s/files/1/0729/9986/2324/files/nanopaper-v8-pet-comparison-20261023.png?v=1792785815)

Antenna patterns before and after the comparison study’s complete processing sequence.

This is a visual comparison of the tested films. Dimensional change was not quantified, and these photographs do not compare RFID read range.

## What to evaluate next

For an application trial, tune the antenna to the intended reader and operating conditions, then measure read distance, repeated-read performance and connection reliability. Bending, humidity and aging tests should evaluate the complete printed and soldered construction.

[Plan your own direct ink writing trial](https://docs.nanopaper.io/printing/direct-ink-writing/), and use the current [technical data sheet](https://docs.nanopaper.io/material/tds/) for general material values and processing examples.

## What are you developing?

Share a short, non-confidential summary of the application you have in mind.

[Discuss your application](https://docs.nanopaper.io/application-inquiry/) · [Technical data sheets](https://docs.nanopaper.io/material/tds/)

## Share this post

<https://www.facebook.com/sharer/sharer.php?u=https%3A%2F%2Fdocs.nanopaper.io%2Fblog%2Fcopper-rfid-prototype-on-nanopaper><https://twitter.com/intent/tweet?url=https%3A%2F%2Fdocs.nanopaper.io%2Fblog%2Fcopper-rfid-prototype-on-nanopaper><https://www.linkedin.com/shareArticle?mini=true&url=https%3A%2F%2Fdocs.nanopaper.io%2Fblog%2Fcopper-rfid-prototype-on-nanopaper><https://pinterest.com/pin/create/button/?url=https%3A%2F%2Fdocs.nanopaper.io%2Fblog%2Fcopper-rfid-prototype-on-nanopaper>[mailto:https%3A%2F%2Fdocs.nanopaper.io%2Fblog%2Fcopper-rfid-prototype-on-nanopaper](mailto:https%3A%2F%2Fdocs.nanopaper.io%2Fblog%2Fcopper-rfid-prototype-on-nanopaper)

## Keep reading

### [![Printed silver electrodes used in the NanoPaper capacitive touch demonstration.](https://cdn.shopify.com/s/files/1/0729/9986/2324/files/nanopaper-v8-capacitive-electrodes-20261023.jpg?v=1792785820) Capacitive touch on NanoPaper](https://docs.nanopaper.io/blog/capacitive-touch-on-nanopaper)

### [![NanoPaper samples after exposure at 150 °C for 1, 3, 5, 10, 20 and 30 minutes.](https://docs.nanopaper.io/hs-fs/hubfs/Screenshot%202026-10-29%20at%202.27.32%20PM-1.png?width=1010&height=682&name=Screenshot%202026-10-29%20at%202.27.32%20PM-1.png) Thermal processing and color](https://docs.nanopaper.io/blog/understanding-nanopaper-thermal-processing)

© 2025, [Tangho Green Canada Inc.](https://tangho.green/) · [Privacy policy](https://nanopaper.io/policies/privacy-policy) · [Terms of service](https://nanopaper.io/policies/terms-of-service) · [Contact information](https://nanopaper.io/policies/contact-information) · [Refund policy](https://nanopaper.io/policies/refund-policy)

```json
{
  "@context" : "https://schema.org",
  "@type" : "BlogPosting",
  "author" : {
    "@type" : "Person",
    "name" : "Dr. Andrew Finkle",
    "url" : "https://docs.nanopaper.io/blog/author/dr-andrew-finkle"
  },
  "dateModified" : "2026-10-29T18:57:42.951Z",
  "datePublished" : "2026-10-26T21:04:00.000Z",
  "headline" : "Copper RFID prototype on NanoPaper",
  "image" : [ "https://cdn.shopify.com/s/files/1/0729/9986/2324/files/nanopaper-v8-rfid-reader-20261023.jpg?v=1792785806" ],
  "mainEntityOfPage" : {
    "@id" : "https://docs.nanopaper.io/blog/copper-rfid-prototype-on-nanopaper",
    "@type" : "WebPage"
  },
  "publisher" : {
    "@type" : "Organization",
    "logo" : {
      "@type" : "ImageObject",
      "url" : "https://docs.nanopaper.io/hubfs/Imported%20images/Tangho_Logo.svg"
    },
    "name" : "Tangho Green Canada Inc."
  }
}
```